ГОСТ 7275-75 is a Russian state standard that specifies the technical requirements for adjustable wrenches. This standard is titled "Ключи гаечные разводные. Технические условия" in Russian, which translates to "Adjustable wrenches. Specifications" in English. The standard applies to adjustable wrenches manufactured for domestic economic needs and export purposes. It outlines the following key aspects:
- Basic dimensions: The standard defines the fundamental size requirements for adjustable wrenches.
- Technical specifications: It provides detailed technical conditions that the wrenches must meet to comply with the standard.
- Scope: ГОСТ 7275-75 covers various types of adjustable wrenches used in different industries and applications.
This standard has undergone revisions, with at least two amendments (Изменения N 1, 2) being incorporated since its initial publication. The full text of ГОСТ 7275-75 is available for reference, allowing manufacturers and users to access the complete set of requirements and specifications for adjustable wrenches. As an interstate standard (межгосударственный стандарт), ГОСТ 7275-75 is likely recognized and used across multiple countries that were formerly part of the Soviet Union or have agreements to use GOST standards.
В ГОСТ 7275-75 "Ключи гаечные разводные. Технические условия" were the following changes:
- Изменение №1, which came into force on September 1, 1987.
- Изменение №2, which came into effect on October 1, 1989.
Both of these changes were integrated into the standard's text. It is important to note that ГОСТ 7275-75 itself has been invalidated in the Russian Federation since January 1, 2013. This means that although the standard has undergone changes during its validity period, it is currently not applied in the territory of Russia. Unfortunately, the specific content of these changes is not indicated in the provided search results. To obtain detailed information about the nature of the changes made, it would be necessary to refer to the full text of the standard and the corresponding amendments.
ГОСТ 7275-75 "Ключи гаечные разводные. Технические условия" was invalidated in the Russian Federation on January 1, 2013. Although the specific reason for the invalidation is not indicated in the provided search results, several possible factors can be assumed:
- The standard became outdated: ГОСТ 7275-75 was adopted in 1975, and despite the amendments made in 1987 and 1989, it may have become outdated in terms of modern production technologies and tool requirements.
- Replacement with a new standard: A new, more modern standard may have been developed and adopted, replacing ГОСТ 7275-75.
- Harmonization with international standards: As part of Russia's integration into the global economy and standardization, there may have been a need to bring national standards in line with international norms.
- Changes in the standardization system: In Russia, there was a process of reforming the technical regulation system, which could have led to the review and invalidation of some outdated GOSTs.
- Transition to voluntary application: Some GOSTs were transferred from mandatory to voluntary, which could have affected the status of this standard.
It is important to note that the invalidation of ГОСТ 7275-75 does not necessarily mean that the requirements for adjustable wrenches have ceased to exist. They were likely included in other regulatory documents or replaced with more modern standards.
Unfortunately, the provided search results do not directly indicate the standards that replaced ГОСТ 7275-75 "Ключи гаечные разводные. Технические условия" after its invalidation in the Russian Federation on January 1, 2013. However, several possible directions for the development of standardization in this area can be assumed:
- Some aspects of ГОСТ 7275-75 may have been integrated into more modern standards related to wrenches. For example, the following related GOSTs are mentioned in the search results:
- ГОСТ 10112-80 "Ключи гаечные двусторонние. Размеры зевов"
- ГОСТ 10112-2001 "Ключи гаечные двусторонние. Размеры комбинаций зевов"
- ГОСТ 2906-80 "Ключи гаечные кольцевые двусторонние коленчатые. Конструкция и размеры"
- ГОСТ 16983-80 "Ключи гаечные комбинированные. Конструкция и размеры"
- ГОСТ Р ИСО 4229-2013 "Ключи гаечные односторонние для низких крутящих моментов. Головки ключей. Основные параметры" is also mentioned, which may indicate a trend towards harmonizing Russian standards with international ISO norms.
- After the invalidation of ГОСТ 7275-75, manufacturers of adjustable wrenches may have started to focus on international standards or technical conditions of enterprises.
To obtain accurate information about the standards that replaced ГОСТ 7275-75, it is necessary to refer to official sources of Rosstandart or conduct additional research on current regulatory documents in the field of production and technical requirements for adjustable wrenches.
При оформлении декларации соответствия необходимо подтвердить, что продукция отвечает установленным требованиям.
Преимущества соблюдения ГОСТ
- Подтверждение качества и безопасности продукции.
- Упрощение сертификации и контроля.
- Повышение доверия покупателей и партнеров.
- Снижение рисков претензий со стороны контролирующих органов.